Solar PV Mounting Systems

Rooftop Mounted Systems

Residential_Rooftop_Retrofit
 

 

Metal deck rooftop (typical for Commercial and Industrial Facilities)

Industrial Facility (e.g. Factory):

metaldeck_3

 

Car Park Shelter:

metaldeck_1
metaldeck_2

 

• Can be installed on sheet metal, tar-bitumen, PVC and concrete roof membrane
• All penetration points sealed with EPDM and warranty of 15 years against leaking (at penetration point)
• For Mono-crystalline, Poly-crystalline and Thin Film Modules
• Flexible tilt angle to suit installation location
• Minimum system capacity: 1 kWp
• Patented assembly system
• 20 years warranty against corrosion
 

 

 

Ground Mounted Systems

Ground_Mounted

Ground_Mounted_1 Ground_Mounted_2 Ground_Mounted_3

• Hot-dip galvanized steel columns piled into ground

• Flexible mounting of aluminium structure (according to terrain surface)

• For Mono-crystalline, Poly-crystalline and Thin Film Modules

• Flexible tilt angle to suit installation location

• Minimum system capacity: 500 kWp

• Patented assembly system

• 20 years warranty against corrosion

 
 

 

 

Customized Mounting Systems

Facade_Installation Flat_Roof_Installation Open_Land_Installation
It does not necessarily have to be the roof or the ground and it certainly does not necessarily have to be flat or tilted at a specific angle. For aesthetic reasons, architects and designers may let their ideas run wild to create an architecture masterpiece. A unique mounting system can be tailor-made to satisfy your needs, we provide the necessary engineering evaluations to assess the feasibility of an out-of-the-box approach.
 

Contact Us

Email us at This email address is being protected from spambots. You need JavaScript enabled to view it.

OR call us at:

KL (Boon)   +6012 5231719
KL (Kev)   +6012 4237876
Penang    +6012 7783866

Alternatively, please use our feedback form.

Login Form

Solution by Nicamstar Infinity Studio